Skip to content

Cart

Your cart is empty

Not All Lasers Are The Same

Before price, brand, or appearance, there are fundamental differences in how laser systems are designed and how they deliver light. Understanding those differences matters. A device may produce red light or have an impressive power specification – it may even be called a laser – but no single specification tells you how the system is designed to perform. 

The more important questions go deeper: What kind of light does it produce? Which wavelengths are included? How many true  laser diodes are being used? At what power? Is the light pulsed or continuous? How are timing and placement determined? And how are these variables designed to work together? Because when it comes to photobiomodulation (PBM), the details matter. 

UNDERSTANDING LASER LIGHT

Laser light is not just light; it is precision.

LASER stands for Light Amplification by Stimulated Emission of Radiation. Unlike ordinary light that spreads broadly in many directions, laser light has specific optical characteristics: It can be coherent, highly directional, and produced within a narrow wavelength range. These characteristics distinguish true laser light from conventional light sources and allow light energy to be delivered with a high degree of precision. 

But being a laser is only the beginning. PBM depends on a combination of parameter: Power, wavelength, irradiance, pulsing, exposure time, placement, and total energy delivered can all influence how light interacts with biological tissue. 

At the cellular level, PBM research explores how light interacts with biological chromophores and mitochondrial processes involved in cellular activity and the production of adenosine triphosphate (ATP), the primary energy source used by cells. 

This is where comparing laser systems becomes more interesting: Two devices can produce light at the same wavelength and still be very different systems. Wavelength alone does not tell you the power being delivered, the number or type of light sources producing it, whether the light is pulsed, the exposure parameters being used, or how the device is intended to be positioned. The specification that gets the most attention is not always the specification that tells the whole story.

It is the system that matters. The Blue Honest PRO VX laser system is  designed to support the relationship between these variables rather than any single specification. Its 6 wavelengths, 15 true laser diodes, 700+ pulsed frequencies, power configuration, preprogrammed timing, and placement guidance work as parts of a larger system. 

That philosophy is also the reason for this guide. These 10 Essentials are not simply a list of PRO VX features – they are a framework for understanding the technology itself and the questions worth asking before choosing a laser. 

What separates one laser system from another is rarely one feature. It is how the science, specifications, and application come together. 

01 - Coherence

LED vs. LASER LIGHT

The difference between laser and LED light begins with precision. A true laser diode produces light within a narrow spectral range, allowing it to deliver a specific wavelength with a high degree of accuracy. 

LED light is different. Its output is spread across a broader range of wavelengths. An LED may be identified by a peak wavelength, such as 635 nm, but that does not mean all of the light it produces is  precisely 635 nm. Its actual spectral output extends across a range around that peak. This difference is significant because wavelength matters in photobiomodulation (PBM).

Different wavelengths interact differently with biological tissue and biological chromophores. If the wavelength matters, the precision of that wavelength matters, too. 

Laser light is also coherent and highly  directional. Its light waves maintain an organized relationship as they travel, while LED light is noncoherent and spreads more broadly from the source. These are fundamental differences in the light itself, not simply differences in power or brightness.

PRECISION AT THE SOURCE

The Blue Honest PRO VX laser system uses 15 true laser diodes producing six specific wavelengths: 405, 470, 520, 635, 670 and 808 nm. Each wavelength is generated by a laser diode, giving the system the wavelength precision and coherent light characteristics that distinguish a true laser from an LED-based light source. Coherence, wavelength precision, and  directionality all begin at the source.

WHEN LIGHT ENTERS TISSUE

Once light enters biological tissue, photons can be reflected, scattered, or absorbed. Tissue composition, wavelength, beam geometry, irradiance, and other optical properties all influence how much light ultimately reaches a particular depth. 

Laser light begins with different optical characteristics than LED light. Laser beams can be highly directional and collimated, while LED light is generally more divergent. Research is examining how these characteristics influence the propagation of light within tissue.

Wavelength is also critical. Shorter visible wavelengths are generally absorbed more strongly closer to the surface, while longer red and near-infrared wavelengths can penetrate more deeply. Research has demonstrated that penetration varies by wavelength and tissue type. This makes the 808 nm near-infrared wavelength an important part of the Blue Honest PRO VX spectrum. It provides a deeper-penetrating component alongside the visible wavelengths, which have their own optical and biological interactions. 

Each wavelength retains its own optical characteristics. Infrared does not physically carry the other wavelengths deeper. Rather, combining visible and near-infrared wavelengths provides different absorption characteristics and penetration profiles across the spectrum. 

And deeper does not automatically mean better. The objective is not simply to go as deep as possible, but to combine  wavelengths with different characteristics within one system. If the wavelength matters, the accuracy of the wavelength matters too.

02 - FDA-Cleared

CONFIDENCE IN YOUR INVESTMENT

FDA clearance is not the measure of every product or approach to health, but when you are investing in a sophisticated piece of technology like a laser, it becomes an important part of the decision.

The Blue Honest PRO VX is an FDA-cleared Class 3B laser.1 For a device at this level of technology and investment, FDA clearance provides an added level of confidence that the product has gone through an established regulatory process and is being marketed for its cleared intended use. It does not tell you everything about a laser, and it does not replace understanding the technology itself. 

But when you are making a significant investment, it offers something valuable: Peace of mind about the device and the company behind it.

03 - Wavelengths + Nanometers

THE SCIENCE OF WAVELENGTH

Wavelength is one of the most important variables in photobiomodulation (PBM). Measured in nanometers (nm), wavelength describes the distance between successive peaks of a light wave. The light we can see is only a small portion of the electromagnetic spectrum. Visible light occupies approx. 400 to 780 nm; ultraviolet falls below the visible range, while infrared extends beyond it. 

But wavelength is much more than a measurement of color. Wavelengths interact differently with biological tissue and can be absorbed by different chromophores. This is why selecting a wavelength is not simply a matter of choosing red, blue or infrared light. 

The PRO VX incorporates six specific wavelengths: 405 nm violet, 470 nm blue, 520 nm green, 635 nm red, 670 nm bright red, and 808 nm infrared. Together, they create a spectrum designed to provide different optical and biological interactions within one laser system.

BEYOND RED LIGHT

Red and near-infrared wavelengths receive much of the attention in PMB, but the science of light extends beyond them. Shorter visible wavelengths – including violet, blue and green – have also been investigated for their interactions with biological chromophores and photochemical processes.

LIGHT + MITOCHONDRIA + ATP

One of the most studied areas of PBM is the interaction between light and cellular energy processes. Mitochondria produce much of the cell's adenosine triphosphate (ATP), through a series of reactions involving the electron transport chain. ATP provides usable energy for cellular activity. 

PBM research investigates how light absorbed by chromophores can influence mitochondrial activity, cellular signaling, and ATP production. Red and near-infrared wavelengths receive attention for interactions involving mitochondrial chromophores, including cytochrome c oxidase, while shorter visible wavelengths can interact with other light-absorbing molecules, including flavins and porphyrins.

This helps explain why wavelength selection matters: Wavelengths can interact with different light-absorbing molecules and biological processes.

WHY 6 WAVELENGTHS?

Many PBM devices focus on red and near-infrared light. The Blue Honest PRO VX laser system brings together 405, 470, 520, 635, 670, and 808 nm across 15 true laser diodes.  Rather than relying on a narrow portion of the spectrum, the PRO VX incorporates wavelengths with different characteristics and biological interactions into a broader full spectrum design. This makes wavelength one of the defining characteristics of the PRO VX.

04 - Number of Laser Diodes

WHAT IS PRODUCING THE LIGHT?

Wavelength and total power receive a lot of attention when comparing lasers. But another specification is equally worth understanding: How many actual laser diodes are producing that light? 

A laser diode is the light source inside the system. Each produces laser light at a specified wavelength and power. More diodes alone do not automatically make a better laser. What matters is which wavelengths those diodes produce, how much power they deliver, and how they are configured within the complete system.

WHY CONFIGURATION MATTERS

The diode configuration tells you more than a total power number alone. In the Blue Honest PRO VX laser system, 1,000 mW of the total output comes from four 808 nm near-infrared diodes, while the remaining 11 laser diodes provide the 5 visible wavelengths. 

This matters because wavelength and power describe different aspects of the system. Wavelength influences how light interacts with tissue and chromophores. Power influences how much energy can be delivered over time. Diode configuration shows how those specifications are physically brought together inside the device. 

So “How powerful is it?” is only part of the  question. We should ask how many true laser diodes are producing that power, and which wavelengths are they producing. 

DESIGNED AS A COMPLETE SYSTEM

The Blue Honest PRO VX diode configuration brings visible and near-infrared laser light together within one device rather than relying on a single wavelength or high-powered light source. The laser’s 15 diodes form the physical foundation of the 6-wavelength spectrum and determine how the PRO VX's 1,110 mW total output is distributed. 

The number of diodes matters. What those diodes are designed to do together matters even more.

05 - Pulsed Frequencies

DIALING IN THE LASER

Laser light can be delivered continuously or in pulses. Pulse frequency is measured in Hertz (Hz), with one Hz representing one pulse per second. This gives laser designers a variable to work with beyond wavelength and power: the pattern in which the light is delivered. 

Research demonstrates that biological  responses can differ between continuous and pulsed light under certain conditions, and that changing pulse parameters can also influence the observed response.

WHY PULSING MATTERS

Pulsing changes the way light energy is delivered over time. Research comparing continuous and pulsed PMB has found that different pulse frequencies and delivery modes can produce different biological responses. 

This does not mean that one frequency is universally superior to another. It means that frequency is another parameter capable of influencing the interaction. A laser system is not defined only by its wavelengths or power. How the light is delivered matters. 

06 - Power

POWER MEANS TIME

Power is one of the easiest laser specifications to compare because it gives you a number – but a bigger number does not automatically mean a better laser. In PBM, power is measured in watts or milliwatts and describes the rate at which energy is being delivered. Time then becomes part of the relationship: Energy = Power x Time. This relationship is why Blue Honest describes this Essential simply: Power means time. 

SAME ENERGY, DIFFERENT VIBE

The difference becomes clear when comparing how long different power levels take to deliver the same amount of energy. To deliver approximately 100 joules: 

  • 1,000 mW → approximately 2 minutes
  • 100 mW →  approximately 20 minutes 
  • 10 mW →  approximately 200 minutes 

These are rounded examples based on the basic relationship between power, energy and time. The point is not that the highest possible power is always best; it is that power directly affects how quickly a given amount of energy can be delivered.

MORE TIME ISN'T ALWAYS BETTER

It may seem logical that a very low-powered laser could simply be used longer to compensate, but PBM research suggests the relationship is more complex. Experimental work has demonstrated the importance of light intensity, including evidence that simply extending exposure time with a weaker source does not necessarily reproduce the same biological response at a different intensity.

This is one reason power and timing are so closely connected. How much light is  delivered matters. How quickly it is delivered matters too. 

POWER ACROSS THE PRO VX SPECTRUM

The Blue Honest PRO VX laser system has a combined output of 1,110 mW, with 1,000 mW coming from four 808 nm near infrared laser diodes and the remaining power distributed across the visible wavelengths. That power allows energy to be delivered within practical application times. But it also introduces another important consideration. If power determines how quickly energy is delivered, timing determines how long it is delivered. 

Those two factors are closely connected, which is why understanding power naturally leads to timing.

07 - Timing

LONGER IS NOT BETTER

If power determines how quickly energy can be delivered, timing determines how long that energy is applied. It is tempting to assume that if a certain amount of laser exposure is beneficial, using the laser longer should produce an even greater response.

PBM research shows why that assumption can be misleading. Light can produce a biphasic dose response, meaning the biological response can change as exposure increases. 

At a level that is too low, there may be little or no measurable response. As exposure increases, the response can reach a more effective range. Beyond that range, increasing exposure further may reduce or inhibit the desired response. More is not necessarily better. 

THE ARNDT-SCHULTZ LAW

The Arndt-Schultz Law describes the principle that biological responses can change with the strength of a stimulus. In PBM, this concept is commonly discussed as a biphasic dose response. A small stimulus may produce little response. An appropriate stimulus may produce a stronger response. An excessive stimulus may reduce or inhibit that response.

The important part of this curve is the optimal window. PBM is not simply about leaving a laser in place for as long as possible. The amount of light being delivered and the duration of exposure both matter.

WHY TIMING IS PREPROGRAMMED

The PRO VX uses preprogrammed timing within its settings. The user does not need to calculate exposure times or assume that doubling the time will produce twice the benefit. The timing is already incorporated into the programming. This takes one of the most important variables in laser use and removes the guesswork from the person holding the device. The goal is not the longest application – it is the appropriate
application time. 

08 - Placement

WHERE THE LASER IS USED MATTERS

A precisely designed laser still has to be applied in the right place. Different goals can call for different placement strategies, and a localized application is not necessarily approached the same way as a broader or systemic application. This is why placement is part of the Blue Honest PRO VX laser system rather than an afterthought. 

MORE THAN A SETTING

Using a laser involves more than choosing a setting from a menu. The complete application can include where the laser is placed, how long it is used, how often it is used, and which settings are intended to be used together. These details can change depending on the intended application. 

The PRO VX was designed to reduce the guesswork by pairing its preprogrammed settings with detailed placement information and diagrams. 

09 - Humans + Animals

PBM ACROSS SPECIES

PBM is studied in human and veterinary research. Published research includes studies involving dogs, horses, and cats, with researchers investigating PBM across a variety of applications. A systematic review of the veterinary literature finds there is a growing body of research, while also noting there is considerable variation in study quality and protocols. This research also reveals something critically important about using light with animals: The animal itself can change how light is delivered. 

COAT + PIGMENTATION + LIGHT

Animals introduce variables that are not present in the same way when applying a laser to exposed human skin. Research in dogs has examined the effect of wavelength, laser power, coat color, coat length and shaving on the transmission of laser light through tissue. In one such study involving 47 dogs, researchers found wavelength, power, coat pigmentation, and coat density (shaved vs. not shaved) significantly affected laser transmission: Darker pigmentation reduced transmission, while shaving increased it.

That makes animal laser application its own subject, rather than simply taking instructions designed for humans and applying them to an animal.

DESIGNED FOR HUMANS + ANIMALS

The Blue Honest PRO VX laser system can be configured for human use, animal use, or combined for human and animal use. The underlying laser technology remains the same, while the settings, placement info, and application guidance are organized for the intended use. Blue Honest provides instructions and placement diagrams, so the person using the PRO VX has guidance specific to the configuration they selected. 

One laser technology can cross species. How it is applied matters.

10 - Herbs + Plants

CHLOROPHYLL ENHANCEMENT

Plants interact with light through a completely different biological system than humans and animals. At the system’s center is chlorophyll, the pigment responsible for absorbing light energy during photosynthesis. Chlorophyll does not absorb every wavelength equally. Its absorption varies across the visible spectrum, which is one reason wavelength matters in plant biology just as it matters elsewhere in light science. 

A UNIQUE FEATURE

The visible wavelengths in the Blue Honest PRO VX overlap portions of the spectrum involved in chlorophyll absorption and plant
photobiology. This gives the system a broader visible spectrum than devices built only around red and near infrared light. 

PLANTS + SUNLIGHT

Plants depend on light to drive  photosynthesis, but the response is influenced by the spectrum, intensity and duration of that light.  Blue and red regions of the visible spectrum are particularly important in photosynthetic light absorption, while different plant pigments absorb light differently across the spectrum. 

ENERGY ABSORPTION

When chlorophyll absorbs light, that energy helps drive the reactions plants use to convert light into usable chemical energy. This process forms the foundation of
photosynthesis. 

Chlorophyll a and chlorophyll b absorb light differently across the visible spectrum, which is one reason the wavelength chart is useful here. The plant application of light is its own area of science. It should not be treated as though plants and human tissue respond to light in the same way. 

What connects them is the underlying principle at the center of the 10 Essentials: Wavelength matters because biological systems interact with light selectively.

BONUS: 11 - Price

UNDERSTANDING VALUE

Price matters. But after looking at the technology behind a laser, price alone becomes one of the least informative ways to compare two systems. 

Two products can both be called lasers while containing very different technology. One may use fewer wavelengths, fewer laser diodes, different power, limited programming or require the user to determine more of the application themselves. That is why value has to be considered in the context of what you are actually buying.

BEYOND THE PRICE TAG

The PRO VX brings together: 6 precise wavelengths, 15 true laser diodes, 1,110 mW total output, 700+ pulsed frequencies, preprogrammed settings and timing, detailed placement guidance; human, animal or combined configurations; and FDA-cleared Class 3B laser technology. These are not simply features added to a specification sheet. They represent the technology, programming, and guidance built into the system. 

A lower purchase price does not necessarily represent a better value if you are comparing fundamentally different devices. Likewise, a higher price should never be accepted simply because a product appears sophisticated. The value is in understanding what the technology actually includes.

AN INVESTMENT YOU UNDERSTAND

A laser at this level is a significant purchase – and you should know what you are paying for. That is ultimately this guide’s purpose: to give you a way to look past marketing language and price tags to examine the technology itself.

The Blue Honest PRO VX brings those elements together in one system, with the programming and guidance to make that technology practical to use. Because the best way to understand the value of a laser is to understand what is inside it. 

IT IS THE LAST LASER YOU WILL EVER NEED.

Contact Blue Honest Today